新葡亰8883ent登陆|(集团)有限公司

新葡亰8883ent登陆-(集团)有限公司

全国热线电话:

17116125111

热门搜索: (集团)有限公司石磨机 (集团)有限公司 (集团)有限公司石磨机 (集团)有限公司
联系大家
    新葡亰8883ent登陆-(集团)有限公司
  • 联系:和经理
  • 电话:17116125111
  • 手机:17116125111
  • 邮箱:3471464452@qq.com
  • 网址:
  • 厂址:山东省济南市章丘区相公庄镇
资讯资讯 您现在的位置:新葡亰8883ent登陆 - 资讯资讯 >

小型面粉加工设备渣磨系统的流程

来源:/发布时间:2021-06-21

小型面粉加工设备加工硬质小麦时,通常采用“先清粉,后入渣”的渣磨流程。该流程的主要特点就是清粉范围较宽,一等高品质的粗粒提取率较高,入渣磨的物料质量较均匀一致,研磨周转率

小型面粉加工设备加工硬质小麦时,通常采用“先清粉,后入渣”的渣磨流程。该流程的主要特点就是清粉范围较宽,一等高品质的粗粒提取率较高,入渣磨的物料质量较均匀一致,研磨周转率低,适合加工硬度大的小麦。缺点就是清粉设备使用稍多,渣磨物料未精选,渣磨的作用没有充分发挥。
When processing hard wheat with small flour processing equipment, the slag grinding process of "clearing powder first, then adding slag" is usually adopted. The main characteristics of this process are wide range of flour cleaning, high extraction rate of first-class high-quality coarse grains, uniform quality of materials into slag mill, low grinding turnover rate, which are suitable for processing wheat with high hardness. The disadvantage is that the cleaning equipment is used a little more, the slag grinding materials are not selected, and the role of slag grinding is not fully played.
小型面粉加工设备加工软质小麦时,可采用“先入渣。后清粉”的站流程,该流程的主要特点是充分发挥了渣磨系统的作用,清粉范围稍窄,清粉机使用数量较少,适合加工软质小麦。缺点是渣磨物料的质量不均匀,小型面粉机周转率高,一等品质的粗粒提取率稍低。
When small flour processing equipment is used to process soft wheat, it can use "slag first". The main characteristics of this process are that it gives full play to the role of slag grinding system, the scope of cleaning is slightly narrow, and the number of cleaning machines is less, so it is suitable for processing soft wheat. The disadvantages are that the quality of slag grinding materials is not uniform, the turnover rate of small flour machine is high, and the extraction rate of first-class quality coarse grains is slightly low.
提取高质量面粉时,通常采用“先清粉,后入渣,再清粉”的渣磨系统,该流程的主要特点是不仅充分发挥了清粉系统的作用,而且充分挖掘渣磨系统的潜力,尽可能多提取一等品质的粗粒、粗粉,该工艺有能力提取数量较多的阿高精度面粉。缺点是清粉机使用台数较多,操作管理要求稍高。渣磨平筛中分级筛的选配是根据平筛的流量、筛理物料的特性和达到制粉流程流量平衡的要求而决定的。
When extracting high-quality flour, the slag grinding system of "first cleaning, then slag, then cleaning" is usually used. The main feature of this process is that it not only gives full play to the role of the cleaning system, but also fully exploits the potential of the slag grinding system to extract as many first-class quality coarse grains and coarse flour as possible. This process has the ability to extract a large number of high-precision flour. The disadvantage is that the number of cleaning machines used is more, and the operation and management requirements are slightly higher. The selection of grading screen in slag grinding flat screen is determined by the flow rate of flat screen, the characteristics of sieving materials and the requirement of flow balance in pulverizing process.
相关资讯
相关产品
新葡亰8883ent登陆 走进中阳 产品中心 石磨小吃 资讯资讯 联系大家 网站地图 XML TXT
新葡亰8883ent登陆-(集团)有限公司技术支撑:网站建设-推广运营

新葡亰8883ent登陆|(集团)有限公司

XML 地图 | Sitemap 地图