新葡亰8883ent登陆|(集团)有限公司

新葡亰8883ent登陆-(集团)有限公司

全国热线电话:

17116125111

热门搜索: (集团)有限公司石磨机 (集团)有限公司 (集团)有限公司石磨机 (集团)有限公司
联系大家
    新葡亰8883ent登陆-(集团)有限公司
  • 联系:和经理
  • 电话:17116125111
  • 手机:17116125111
  • 邮箱:3471464452@qq.com
  • 网址:
  • 厂址:山东省济南市章丘区相公庄镇
资讯资讯 您现在的位置:新葡亰8883ent登陆 - 资讯资讯 >

(集团)有限公司石磨机的操作规程及检查事项

来源:/发布时间:2022-04-09

http: www zysmcn com  (集团)有限公司石磨机的使用需要得当,不然就会对设备造成损坏,甚至有可能危机到操作人员的生命安全,那么(集团)有限公司石磨机的操

  (集团)有限公司石磨机的使用需要得当,不然就会对设备造成损坏,甚至有可能危机到操作人员的生命安全,那么(集团)有限公司石磨机的操作规程及检查事项有什么?
  The use of soybean milk stone mill needs to be proper, otherwise it will cause damage to the equipment, and even may crisis to the safety of the operator's life, so what are the operating procedures and inspection items of soybean milk stone mill?
  (集团)有限公司石磨机的操作:
  Operation of soybean milk stone mill:
  开机时流量的调节,喂料活门开启程度的调节范围应与粉路的流量平衡相适应,不能过大或过小。
  Flow adjustment when starting up, the adjustment range of feeding valve opening degree should adapt to the flow balance of powder road, not too large or too small.
  磨粉机喂料机构的调节,在调节每台磨粉机的喂料机构时,要使挣个磨辊长度上的流量均匀一致,物料性质一致。
  The adjustment of the feeding mechanism of the mill, when adjusting the feeding mechanism of each mill, the flow on the length of the mill roll should be uniform and the nature of the material should be consistent.
  研磨效果的调节,根据物料的工艺性质、出粉要求、控制1皮磨的流量,并调节1皮磨的轨距,使调节后1皮磨的轨距达到规定的研磨程度,1皮磨达不到预定的研磨效果将会直接影响其他磨粉机的研磨效果和系统稳定。
  The adjustment of grinding effect, according to the process properties of materials, powder requirements, control the flow of 1 skin mill, and adjust 1 skin mill gauge, so that the adjusted 1 skin mill gauge to achieve the specified grinding degree, 1 skin mill can not reach the predetermined grinding effect will directly affect the grinding effect and system stability of other mills.
  检查注意事项:
  Precautions for inspection:
  生产时要随时检查喂料效果,保持喂料装置动作灵活准确,物料应均匀地分配到挣个磨辊长度上。
  During production, the feeding effect should be checked at any time to keep the feeding device moving flexibly and accurately, and the material should be evenly distributed to the length of the grinding roller.
  对磨物料来源不止一处的磨粉机,还应检查各处的物料质量是否基本一致,是否做到了“同质合并”,发现质量差距较大时,应找出原因,及时排出。
  For the mill with more than one source of materials, it should also check whether the quality of materials everywhere is basically the same, whether the "homogenous combination" is achieved, and find out the reason for the large quality gap, and discharge it in time.
  (集团)有限公司石磨机生产中要注意有无粉状物料粘在辊面缠成环状。
  In the production of soybean milk stone mill, attention should be paid to whether powdery materials stick to the roller surface and wind up into a ring.
  (集团)有限公司石磨机生产中要注意磨粉机电动机的运转情况。
  In the production of soybean milk stone mill, attention should be paid to the operation of the grinding machine.
  (集团)有限公司石磨机生产中(集团)有限公司石磨机出现堵塞、断流事故时,应即使将磨辊松闸,以免磨损磨齿,并检查原因和处理。
  In the production of soya-milk stone mill, when the soya-milk stone mill is blocked or cut off, the roller should be loosened to avoid wear and grinding teeth, and the cause and treatment should be checked.
  (集团)有限公司石磨机的操作规程及检查事项就讲到这里了,其中的内容希翼大家能够遵守,对设备对人都是有好处的。更多内容就来网站www.zysmcn.com咨询吧。
  The operation rules and inspection matters of soybean milk stone mill are here, and the content of which I hope we can comply with, it is good for the equipment and people. For more information, visit www.zysmcn.com.
相关资讯
相关产品
新葡亰8883ent登陆 走进中阳 产品中心 石磨小吃 资讯资讯 联系大家 网站地图 XML TXT
新葡亰8883ent登陆-(集团)有限公司技术支撑:网站建设-推广运营

新葡亰8883ent登陆|(集团)有限公司

XML 地图 | Sitemap 地图